HVAC-en

Air conditioner Indoor Unit

Posted on by adminweb

Indoor unit air conditioner solutions

1-way ceiling with hot/cold blowing, ABxxxMAERL and ABxxxMAERAD models

    • 1-phase operating power supply 220-240V, frequency 50, 60 Hz
    • Dimensions: 1028x600x185 mm for indoor units with KBTU capacity 5.1(0.5HP), 7.5 (0.75HP), 9.6 (1HP), 12.3 (1.5HP), 15.4 (1.7HP) and 1348x600x185 mm for indoor units with capacity of 19.1 (2HP), 24.2(2.5HP)
    • 10-degree floor airflow design, not blowing directly on people, blowing 3 bases of 20 degrees, 70 degrees and 120 degrees, 7 levels of wind
    • Maximum installation ceiling height 3.5m
    • Equipped with condensate pump, can raise the drain pipe to 700mm
    • Compact design, making the most of corner space, suitable for installation in long and narrow areas to ensure an even distribution of airflow and room temperature such as small meeting rooms, corridors, etc.   

2-way ceiling with hot/cold blowing, models ABxxxMBERL and ABxxxMBERAD

    • 1-phase operating power supply 220-240V, frequency 50, 60 Hz
    • Dimensions: 1160x665x290 mm for indoor units with KBTU capacity 7.5 (0.75HP), 9.6 (1HP), 12.3 (1.5HP), 15.4 (1.7HP), 19.1 (2HP), 24.2 (2.5HP) and 1560x665x290 mm for indoor units with capacity of 27.3 (3HP), 30.7 (3.5HP), 38.2 (4HP), 47.8 (5HP)
    • 10-degree floor airflow design, not blowing directly on people, blowing 3 bases of 20 degrees, 70 degrees and 120 degrees, 7 levels of wind
    • Maximum installation ceiling height 3.5m
    • Equipped with condensate pump, can raise the drain pipe to 700mm
    • The lightweight and slim design makes installation easy and doesn’t take up much space.
    • Haier bacterial filter membrane is supplemented with silver ions and antibacterial organic compounds to kill Escherichia coli staphylococcus aureus.
    • Fresh air mounting door available

Hot/cold compact cassette models ABxxxMCERL and ABxxxMCERA(M) with 410A gas and ABxxxMNFRA with R32 gas

    • 1-phase operating power supply 220-240V, frequency 50, 60 Hz
    • Dimensions: 620x620x260 mm for indoor unit
    • The KBTU/h capacity, for the ABxxxMCERA(M) model using 410A gas is 5 (0.5HP), 7 (0.75HP), 9 (1HP), 12 (1.5HP), 16 (1.75HP), 18 (2HP), 24 (2.5HP).
    • The KBTU/h capacity, for the ABxxxMCERA(M) model using 410A gas is 5 (0.5HP), 7 (0.75HP), 9 (1HP), 12 (1.5HP), 16 (1.75HP), 18 (2HP), 24 (2.5HP).
    • The KBTU/h capacity for the ABxxxMNFRA model using R32 gas is 4 (0.5HP), 5 (0.5HP), 7 (0.75HP), 9 (1HP), 12 (1.5HP), 16 (1.75HP), 18 (2HP), 24 (2.5HP).
    • 10-degree airflow design, not blowing directly on the body, independent control of each blade, optional 7 levels of wind speed, 8 air outlets, creating multi-directional airflow
    • The brushless DC fan design reduces power by up to 50% compared to traditional AC fans, allows stepless speed adjustment, optimizes the design of air ducts, and adopts soundproof wall technology that greatly reduces noise.
    • Haier bacterial filter membrane is supplemented with silver ions and antibacterial organic compounds to kill Escherichia coli staphylococcus aureus.
    • Fresh air mounting door available
    • The electrical box design is easy to access, easy to maintain, the 620×620 mm cladding is well suited to the ceiling decorative cladding standard.
    • Four spoilers can be individually adjusted according to the user’s wishes via the controller, providing maximum comfort for the entire room.
    • Equipped with a drainage pump with a reach of 750mm and a large discharge flow. 

Round cassette hot/cold

    • 1-phase operating power supply 220-240V, frequency 50, 60 Hz
    • Dimensions: 950x950x180 mm for indoor units with KBTU capacity 7.5 (0.75HP), 9.5 (1HP), 12.3 (1.5HP), 17.1 (1.5HP), 19.1 (2HP) and 950x950x204 mm for indoor units with capacity of 24.2 (2.5HP), 27.3 (3HP), 30.7 (3.5HP) and 950x950x246 mm for indoor units with capacity of 38.2 (4HP), 47.8 (5HP), 54.6 (6HP).
    • Detailed Specifications   

    • The pre-designed fresh air intake door allows fresh air from the outside to be brought into the room, which improves air quality and creates a fresh, pleasant atmosphere. The system can be connected to a third-party fresh air supply device and allows on/off control through the controller.
    • The four blades can be individually adjusted to the user’s wishes via the controller, providing maximum comfort for the entire room.
    • Equipped with a drainage pump with a reach of 750mm and a large discharge flow.
    • The design can be installed at a ceiling height of 4.5m 
    • 10-degree airflow design, not blowing directly on the body, independent control of each blade, optional 7 levels of wind speed, 8 air outlets, creating multi-directional airflow
    • Haier bacterial filter membrane is supplemented with silver ions and antibacterial organic compounds to kill Escherichia coli staphylococcus aureus.
    • The brushless DC fan design reduces power by up to 50% compared to traditional AC fans, allows stepless speed adjustment, optimizes the design of air ducts, and adopts soundproof wall technology that greatly reduces noise.
    • The product uses an optional move eye module that allows you to turn on the air conditioner when someone enters and automatically turn it off when someone leaves.

Floor-mounted indoor unit (console) hot/cold, models AFxxxMBERA, AFxxxMBERL with 410A gas and AFxxxMBFRA with R32 gas

    • 1-phase operating power supply 220-240V, frequency 50, 60 Hz
    • Dimensions: 700x600x210 mm for indoor units with KBTU/h capacity 5.1 (0.5HP), 7.5 (0.75HP), 9.5 (1HP), 12.3 (1.5HP), 15.3 (1.75HP), 17 (2HP)
    • Quiet operation: thanks to the use of a low-noise centrifugal fan, the unit always operates smoothly, bringing comfort to your life. Health protection filter: standard antibacterial filter of the indoor unit. 7-level blower.

Hot/cold convertible indoor units, ACxxxMDERA and ACxxxMDERL models with 410A gas

    • 1-phase operating power supply 220-240V, frequency 50, 60 Hz
    • Dimensions: 1000x680x230 mm for indoor units with a capacity of KBTU 9.5 (1HP), 12.3 (1.5HP), 15.4 (1.75HP), 19.1 (2HP) and 1325x680x230 for indoor units with a capacity of 24.2 (2.5HP), 27.3 (3HP), 30.7 (3.5HP) and 1650x680x230 for indoor units with a capacity of 38.2 (4HP), 48 (5HP), 54.6 (6HP).
    • Slim machine design is only 199mm, beautiful and luxurious
    •  Standard, easy-to-install filter: high-efficiency filtration, filtering out dust, smoke and other fine particles in the air, improving indoor air quality. The filter is easy to disassemble, easy to clean, minimizes cleaning and maintenance operations, helping you enjoy fresh air.
    • Haier bacterial filter membrane is supplemented with silver ions and antibacterial organic compounds to kill Escherichia coli staphylococcus aureus.
    • Flexible installation: users can choose to install on the ceiling or install close to the floor.
    • 5-angle adjustment: Dual wind motor design, which both provides up and down wind, and can adjust the wind angle to the left and right, providing comprehensive three-dimensional wind. At the same time, there are four adjustable speeds, improving user comfort.

 

High wall hot/cold indoor unit

    • Built-in electronic throttle, easy to install. DC fan motor, multiple wind speeds, with multiple air spray angles for comfortable airflow.
    • Flexible wind direction adjustment, fast cooling and heating
    • For hotel and housing projects, we can provide externally installed expansion valves to reduce noise levels.
    • Models ASxxxMFFRA and ASxxxMFFRC use R32 gas
    • Models ASxxxMNERAB, ASxxxMFERAB, AsxxxMN(F)ERAB and ASxxxMNERL use 410A gas
    • The refrigeration capacity depending on the reference model has the following ranges KBTU/h 3.8(0.5HP), 5.1(0.5HP), 7.5 (0.75HP), 9.5 (1HP), 12.3 (1.5HP), 15.3 (1.75HP), 19.1 (2HP), 24.2 (2.5HP), 27.3 (3HP), 30.7 (3.5HP)
    • 1-phase operating power supply 220-240V, frequency 50, 60 Hz
    • Haier bacterial filter membrane is supplemented with silver ions and antibacterial organic compounds to kill Escherichia coli staphylococcus aureus.
    • The electronic control box is removable.
    • The PCB board can be removed by pulling directly.
    • Dimensions 812x296x203 mm for 4K, 5K, 7K, 9K, 12K BTU models, 983x322x221mm for 16K, 18K BTU models and 1310x370x286 mm for 24K, 28K, 30K, 36K models.

Ceiling mounted indoor unit connected to hot/cold air duct (Low ESP Duct) low pressure incubation type

    • 1-phase operating power supply 220-240V, frequency 50, 60 Hz.
    • The high-efficiency brushed DC fan motor is used to adjust 7 levels of optional wind speed, and the optimal design of the indoor heat transfer elements and internal air ducts greatly reduces the noise during operation
    • The high-efficiency brushless DC motor is used for stepless speed regulation, and the optimal design of the indoor heat transfer elements and internal air ducts greatly reduces the noise during operation.
    • Anti-cold wind function when in heating mode
    • Equipped as standard with a DC drainage pump with a pipe height of up to 1200mm and an Ag+ silver ion filter
    • Compact design, size 550x450x198mm for 5K, 9K BTU, 700x450x198mm for 12K, 16K BTU, 900x450x198mm for 18K BTU, 1100x450x198mm for 24K BTU
    • Minimum platform width of only 550 mm using 410A gas
    • External static pressure up to 50 Pa
    • The refrigeration capacity depending on the ADxxxmserl  model using gas 410A refers to the detailed specifications with the following ranges KBTU/h 5(0.5HP), 7 (0.75HP), 9 (1HP), 12 (1.5HP), 16 (1.75HP), 18 (2HP), 24 (2.5HP). And  the ADxxxmsFRAM and ADxxxmsFRAD  models using R32 gas refer to the detailed specifications with the following sequences KBTU/h 4(0.5HP), 5(0.5HP), 7 (0.75HP), 9 (1HP), 12 (1.5HP), 16 (1.75HP), 18 (2HP)

Ceiling indoor unit with hot/cold ducted (M&H ESP Duct) medium and high provincial incubation

    • 1-phase operating power supply 220-240V, frequency 50, 60 Hz.
    • Equipped as standard with a DC drainage pump with a pipe height of up to 1200mm and an Ag+ silver ion filter
    • The height is uniform for the entire product line, only 248 mm, which reduces the feeling of cramped and cluttered. Dimensions 700x700x248mm for 5K, 7K, 9K, 12K, 16K BTU, 1100x700x248mm for 18K, 24K, 30K BTU, 1500x700x248mm for 38K, 48K, 54K BTU
    • External static pressure up to 300 Pa
    • Minimum platform width of only 550 mm using 410A gas
    • The refrigeration capacity depending on  the model ADxxxmJerl & ADxxxmTerl using 410A gas refers to the detailed specifications with the following sequences: KBTU/h 5.1 (0.5HP), 7.5 (0.75HP), 9.6 (1HP), 12.3 (1.5HP), 15.4 (1.75HP), 19.1 (2HP), 24.2 (2.5HP), 27.3 (3HP), 30.7 (3.5HP), 38.2 (4.5HP), 47.8 (5.5HP), 54.6 (6HP), 77.1 (8.5HP), 95.5 (10.5HP),  136.5 (15HP), 153.5 (17HP), 191.1 (21HP)

 

Leave a Reply

Your email address will not be published. Required fields are marked *